[ Photos from users for the year 2012 ]
This one is really helpful. Ive tried a few ideas on how to make raising and lowering the mast easier. This thing sits on a bracket on the back end of the trailer, like the original mast support. It was made from the original mast support. You pull a pin out and the wheels drop down. Then you re-install the pin to lock the wheels and remove the screw holding it to the trailer. At that point the whole bracket can roll back, away from the trailer. It is, at this point, still secured to the mast tightly. The mast is also sitting on a roller at the front of the trailer. The whole thing rolls back very easily. Then you loosen the strap that secures the mast to this support. The support then tilts itself forward and rests on the leg in front. The mast is ready to be raised.